Terraturf is designed for pedestrian use to protect the turf playing area at Stadiums when they are being used for non-sporting events. It allows the passage of air and light and each tile overlaps it’s adjacent tiles to prevent rubbish & non-desirable liquids from passing through to the turf – whether natural or artificial.
Installing Terraturf is simple. Overlap each panel and step down until you hear Terraturf snap into position and move on to the next panel. No locks or swinging hinges required.
Unlike competing products made with metal hinges, Terraturf is made from high density polyethylene and will never rust after cleaning. Use any high pressure cold water spray washer to clean up after each event.
Not only is Terraturf significantly less per foot, its light weight means transportation costs can also be trimmed. This makes Terraturf one of the most cost-effective solutions in the Terraplas lineup.
While Terraturf is made from virgin material, it was design to be the most eco-friendly product and is made with 100% Recyclable material.
Unique Terraturf Features
Overlaps - it overlaps, which is unique in turf coverings, therefore there are no gaps for rubbish & liquids to go through onto the turf
Expansion - it has more expansion capacity built into the system, therefore there is absolutely no buckling under extreme temperatures
Cleaning - it is much easier and faster to clean due to its smoother top and bottom surfaces
Lifespan - longer lasting than any other competing system
Price - it is the lowest cost investment
Versatility - should a stadium that currently has natural turf ever decide to change to artificial turf, uniquely, Terraturf has been designed for protection of both natural and artificial turf, therefore the cover would not need to be changed
Safety - Safety is of paramount importance when large crowds are involved and Terraturf is the safest of all turf covers. The solid, totally interlocked floor ensures that there are no tripping hazards, as associated with other systems, and the top surface has an integral non-slip pattern.
Technical Dimensions -50cm (20”) x 25cm (10”) x 25mm (1”) Pinned into blocks prior to leaving the factory according to individual requirements. Weight - 6kgs / 13lbs per square meter (1.2lbs per ft²).
Material - High molecular weight, high density, polyethylene with UV Stabilizer.
Method of Manufacture - Conventional Injection Molded.
Temperature Range - minus 20°C (-4°F) to 45°C (113° F).
Loading - Point load 20mm or ¾” square = 15kgs / 33lbs Spread load 15cm or 6” square = 1,000kgs / 2,200 lbs
Fire Requirements - See separate fire test report.
Storage - Stacked 2 pallets high = 2,580 sq ft in a foot print of 43 sq ft Stacked 3 pallets high = 3,870 sq ft in a foot print of 43 sq ft
Installation Times - 10,000 sq ft can be installed in 1 hour by 18 men.
Colors - Translucent natural material, which allows the passage of light, ensuring grass growth – without yellowing.
Cleaning - High pressure cold water spray washer.
Life Expectancy - Minimum of 10 years.
Applications - Pedestrian flooring to cover natural/synthetic turf for all types of special events.
Slip Resistance - Integral slip resistant surface.
Warranty - Guaranteed for 4 years but has a realistic life expectancy of around 10 years.
Turf Protection Literature
gProxy