INTRODUCING OUR NEW MASTER SERIES PREMIUM COVERMATE™ - THE IDEAL WAY TO INSTALL...
Covermaster's gym floor cover handling system the MASTER SERIES PREMIUM COVERMATE™ is a unique Mobile Storage Rack System for handling and storing Gym Floor Covers. With budget conscious facility managers in mind, Covermaster has taken many of the best features of our industry leading Ultima Series CoverMateTM
II and incorporated them into this new Mobile Storage Rack. Designed to be sturdier with a higher load capacity than other premier racks, the MASTER SERIES PREMIUM COVERMATE™ is more economical and saves your budget money for other areas.
Just as important, MASTER SERIES PREMIUM COVERMATE™ also reduces the risk of back injury because it eliminates manual lifting.
To install the cover, simply roll the MASTER SERIES PREMIUM COVERMATE™ to one end of the gym and lock it in place. Now pull a section off its roller by walking it over to the other end of the gym. Repeat the steps for each section and the entire cover can be on the floor in a matter of minutes....AND REMOVE A GYM FLOOR COVER!
To remove the cover simply do the process in reverse. Attach each cover section to its own roller with the patented, slip-on QUICKCLIPS™ and wind it up with the cranks that are supplied with each MASTER SERIES PREMIUM COVERMATE™. So simple and fast, it's ingenious. And without any manual lifting!
For even greater ease, and especially for frequent users of the cover, we recommend the use of our optional patented Master Series COVERCLEAN™ a single brush assembly, and the POWERMATE™ Power Winder.
Exclusive MASTER SERIES PREMIUM COVERMATE™ Features...
* Available in 6, 8 or 10 roller models or in custom configurations or measurements
* Heavy-duty casters are bolted (not welded) to the frame
* Extendable Safety Outriggers
* Casters feature protective Santoprene® SofTreads
* Rubber mounted brackets are fitted with locking safety clips and Delrin roller bearings
* Push-on QuickClips attach cover section to roller (no screws required)
* Supplied with two hand cranks
MASTER SERIES PREMIUM COVERMATE™
||34 wide x 11’ 5" long x 6'2" high
||6" casters - bolted to the frame (not welded) - featuring protective Santoprene Softreads,
a ball bearing swivel base with lubrication fittings and a Tech-Lock foot brake on two of the casters
||Rubber mounted brackets are fitted with Delrin roller bearings that allow rollers to rotate (bronze bushings are not acceptable) and locking safety clips. The brackets are bolted to the frame and can be moved up or down to allow for various roll dimensions
||2.5" diameter x 11' 4" long, 14 gauge carbon steel.
||Push-on Quick Clips attach cover section to roller - no screws required
||Rollers easily rotate in the bearing housing supports allowing the individual rollers to remain on the rack during the installation an removal of the protective cover (manual or hydraulic lifting of rollers is not acceptable)
||4 bright yellow, push-on clips for each roller
||Two hand cranks or optional power winder
||The frame is made of 2" x 2" x 3/16" angle carbon steel, welding using the MIG welding process.
||20 Year Warranty covering materials and workmanship equivalent to Covermaster Warranty Program, is required.